Herein we provide the full code to realize Figures 1 to 4 that
illustrate the article describing the `superb`

framework
(Cousineau, Goulet, & Harding, 2021).
These figures are based on ficticious data sets that are provided with
the package superb (`dataFigure1`

to
`dataFigure4`

).

Before we begin, we need to load a few packages, including
`superb`

of course:

```
## Load relevant packages
library(superb) # for superbPlot
library(ggplot2) # for all the graphic directives
library(gridExtra) # for grid.arrange
```

If they are not present on your computer, first upload them to your
computer with `install.packages("name of the package")`

.

The purpose of Figure 1 is to illustrate the difference in error bars
when the purpose of these measures of precision is to perform pair-wise
comparisons. It is based on the data from `dataFigure1`

,
whose columns are

```
## id grp score
## 1 1 1 117
## 2 2 1 103
## 3 3 1 113
## 4 4 1 101
## 5 5 1 104
## 6 6 1 114
```

where `id`

is just a participant identifier,
`grp`

indicate group membership (here only group 1 and group
2), and finally, `score`

is the dependent variable.

The first panel on the left is based on stand-alone confidence intervals and is obtained with :

Note that these *stand-alone* error bars could have been
obtained by adding the argument
`adjustments = list(purpose = "single")`

but as it is the
default value, it can be omitted.

The default `theme`

to `ggplot`

s is not very
attractive. Let’s decorate the plot a bit! To that end, I collected some
additional ggplot directives in a list:

```
ornateBS <- list(
xlab("Group"),
ylab("Attitude towards class activities"),
scale_x_discrete(labels = c("Collaborative\ngames", "Unstructured\nactivities")), #new!
coord_cartesian( ylim = c(70,130) ),
geom_hline(yintercept = 100, colour = "black", size = 0.5, linetype=2),
theme_light(base_size = 10) +
theme( plot.subtitle = element_text(size=12))
)
```

```
## Warning: Using `size` aesthetic for lines was deprecated in ggplot2 3.4.0.
## ℹ Please use `linewidth` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
```

so that the first plot, with these ornaments and a title, is:

The second plot is obtained in a simar fashion with just one additional argument requesting difference-adjusted confidence intervals:

```
plt1b <- superbPlot(dataFigure1,
BSFactors = "grp",
variables = "score",
adjustments = list(purpose = "difference"), #new!
plotStyle = "line" )
plt1b <- plt1b + ornateBS + labs(subtitle="Difference-adjusted\n95% CI")
plt1b
```

Finally, the *raincloud* plot is obtained by changing the
`plotStyle`

argument:

```
plt1c <- superbPlot(dataFigure1,
BSFactors = "grp",
variables = "score",
adjustments = list(purpose = "difference"),
plotStyle = "raincloud", # new layout!
violinParams = list(fill = "green", alpha = 0.2) ) # changed color to the violin
plt1c <- plt1c + ornateBS + labs(subtitle="Difference-adjusted\n95% CI")
plt1c
```

All three plots are shown side-by-side with:

and exported to a file, with, e.g.:

```
png(filename = "Figure1.png", width = 640, height = 320)
grid.arrange(plt1a, plt1b, plt1c, ncol=3)
dev.off()
```

You can change the smooth density estimator (the `kernel`

function) by adding to the `violinParams`

list the following
attribute: `kernel = "rectangular"`

for example to have a
ragged density estimator.

In the end, which error bars are correct? Remember that the
*golden rule of adjusted confidence intervals* is to look for
**inclusion**: for example, is the mean of the second group
part of the possible results suggested by the first group’s confidence
interval? yes it is in the central plot. The central plot therefore
indicate an absence of signficant difference. The confidence intervals
being 95%, this conclusion is statistically significant at the 5%
level.

Still not convinced? Let’s do a *t* test (actually, a Welch
test; add `var.equal = TRUE`

for the regular *t* test;
Delacre, Lakens, & Leys (2017)):

```
##
## Welch Two Sample t-test
##
## data: dataFigure1$score[dataFigure1$grp == 1] and dataFigure1$score[dataFigure1$grp == 2]
## t = 1.7612, df = 47.996, p-value = 0.08458
## alternative hypothesis: true difference in means is not equal to 0
## 95 percent confidence interval:
## -0.7082323 10.7082323
## sample estimates:
## mean of x mean of y
## 105 100
```

There are no significant difference in these data at the .05 level, so that the error bar of a 95% confidence interval should contain the other result, as is the case in the central panel.

Finally, you could try here the Tryon’s adjustments (changing to
`adjustments = list(purpose = "tryon")`

). However, you will
notice no difference at all. Indeed, the variances are almost identical
in the two groups (9.99 vs. 10.08).

Figure 2 is made in a similar fashion, and using the same decorations
`ornate`

as above with just a different name for the variable
on the horizontal axis:

```
ornateWS <- list(
xlab("Moment"), #different!
scale_x_discrete(labels=c("Pre\ntreatment", "Post\ntreatment")),
ylab("Statistics understanding"),
coord_cartesian( ylim = c(75,125) ),
geom_hline(yintercept = 100, colour = "black", linewidth = 0.5, linetype=2),
theme_light(base_size = 10) +
theme( plot.subtitle = element_text(size=12))
)
```

The difference in the present example is that the data are from a within-subject design with two repeated measures. The dataset must be in a wide format, e.g.,

```
## id pre post
## 1 1 105 128
## 2 2 96 96
## 3 3 88 102
## 4 4 80 88
## 5 5 90 83
## 6 6 86 99
```

This makes the left panel:

```
plt2a <- superbPlot(dataFigure2,
WSFactors = "Moment(2)",
variables = c("pre","post"),
adjustments = list(purpose = "single"),
plotStyle = "line" )
plt2a <- plt2a + ornateWS + labs(subtitle="Stand-alone\n95% CI")
plt2a
```

… and this makes the central panel, specifying the `CA`

(*correlation-adjusted*) decorelation technique:

```
plt2b <- superbPlot(dataFigure2,
WSFactors = "Moment(2)",
variables = c("pre","post"),
adjustments = list(purpose = "difference", decorrelation = "CA"), #new
plotStyle = "line" )
```

`## superb::FYI: The average correlation per group is 0.8366`

As seen, `superbPlot`

issues relevant information
(indicated with `FYI`

messages), here the correlation.

To get a sense of the general trends in the data, we can examine the data participants per participants, joining their results with a line. As seen below, for most participants, the trend is upward, suggesting a strongly reliable effect of the moment:

```
plt2c <- superbPlot(dataFigure2,
WSFactors = "Moment(2)",
variables = c("pre","post"),
adjustments = list(purpose = "difference", decorrelation = "CA"),
plotStyle = "pointindividualline" ) #new
plt2c <- plt2c + ornateWS + labs(subtitle="Correlation and difference-\nadjusted 95% CI")
plt2c
```

Just for the exercice, we also compute the plot of the difference between the scores. To that end, we need different labels on the x-axis and a different range:

```
ornateWS2 <- list(
xlab("Difference"),
scale_x_discrete(labels=c("Post minus Pre\ntreatment")),
ylab("Statistics understanding"),
coord_cartesian( ylim = c(-25,+25) ),
geom_hline(yintercept = 0, colour = "black", linewidth = 0.5, linetype=2),
theme_light(base_size = 10) +
theme( plot.subtitle = element_text(size=12))
)
```

We then compute the differences and make the plot:

```
dataFigure2$diff <- dataFigure2$post - dataFigure2$pre
plt2d <- superbPlot(dataFigure2,
WSFactor = "Moment(1)",
variables = c("diff"),
adjustments = list(purpose = "single", decorrelation = "none"),
plotStyle = "raincloud",
violinParams = list(fill = "green") ) #new
plt2d <- plt2d + ornateWS2 + labs(subtitle="95% CI \nof the difference")
plt2d
```

This last plot does not require decorrelation and is not adjusted for
difference. Decorrelation would not do anything as `diff`

is
a single column; difference-adjustment is inadequate here as the
difference is to be compared to a fix value (namely 0, for zero
improvement)

Assembling all four panels, we get:

… which can be exported to a file as usual:

```
png(filename = "Figure2.png", width = 850, height = 320)
grid.arrange(plt2a, plt2b, plt2c, plt2d, ncol=4)
dev.off()
```

Which error bars are depicting the significance of the result most aptly? The adjusted ones seen in the central panel, as confirmed by a t-test on paired data:

```
##
## Paired t-test
##
## data: dataFigure2$pre and dataFigure2$post
## t = -2.9046, df = 24, p-value = 0.007776
## alternative hypothesis: true mean difference is not equal to 0
## 95 percent confidence interval:
## -8.552864 -1.447136
## sample estimates:
## mean difference
## -5
```

The confidence interval of one moment does not *include* the
result from the other moment, indicating a significant difference
between the two moments.

The novel element in Figure 3 is the fact that the participants have been recruited by clusters of participants.

We first adapt the ornaments for this example:

```
ornateCRS <- list(
xlab("Group"),
ylab("Quality of policies"),
scale_x_discrete(labels=c("From various\nfields", "From the\nsame field")), #new!
coord_cartesian( ylim = c(75,125) ),
geom_hline(yintercept = 100, colour = "black", linewidth = 0.5, linetype=2),
theme_light(base_size = 10) +
theme( plot.subtitle = element_text(size=12))
)
```

Then, we get an unadjusted plot as usual:

```
plt3a <- superbPlot(dataFigure3,
BSFactors = "grp",
variables = "VD",
adjustments = list(purpose = "single", samplingDesign = "SRS"),
plotStyle = "line" )
plt3a <- plt3a + ornateCRS + labs(subtitle="Stand-alone\n95% CI")
plt3a
```

Here, the option `samplingDesign = "SRS"`

is the default
and can be omitted.

To indicate the presence of *cluster-randomized sampling*, the
`samplingDesign`

option is set to `"CRS"`

and an
additional information, `clusterColumn`

is indicated to
identify the column containing the cluster membership information:

```
plt3b <- superbPlot(dataFigure3,
BSFactors = "grp",
variables = "VD",
adjustments = list(purpose = "difference", samplingDesign = "CRS"), #new
plotStyle = "line",
clusterColumn = "cluster" ) #new
```

`## superb::FYI: The ICC1 per group are 0.491 0.204`

An inspection of the distribution does not make the cluster structure evident and therefore a raincloud plot is maybe little informative in the context of cluster randomized sampling…

```
plt3c <- superbPlot(dataFigure3,
BSFactors = "grp",
variables = "VD",
adjustments = list(purpose = "difference", samplingDesign = "CRS"),
plotStyle = "raincloud",
violinParams = list(fill = "green", alpha = 0.2),
clusterColumn = "cluster" )
plt3c <- plt3c + ornateCRS + labs(subtitle="Cluster and difference-\nadjusted 95% CI")
```

Here is the complete Figure 3:

This figure is saved as before with

```
png(filename = "Figure3.png", width = 640, height = 320)
grid.arrange(plt3a, plt3b, plt3c, ncol=3)
dev.off()
```

To make the correct *t* test in the present case, we need a
correction factor called \(\lambda\).
An easy way is the following (see Cousineau &
Laurencelle, 2016 for more)

```
res <- t.test( dataFigure3$VD[dataFigure3$grp==1],
dataFigure3$VD[dataFigure3$grp==2],
)
# mean ICCs per group, as given by superbPlot
micc <- mean(c(0.491335, 0.203857))
# lambda from five clusters of 5 participants each
lambda <- CousineauLaurencelleLambda(c(micc, 5, 5, 5, 5, 5, 5))
tcorrected <- res$statistic / lambda
pcorrected <- 1 - pt(tcorrected, 4)
cat(paste("t-test corrected for cluster-randomized sampling: t(",
2*(dim(dataFigure3)[1]-2),") = ", round(tcorrected, 3),
", p = ", round(pcorrected, 3),"\n", sep= ""))
```

`## t-test corrected for cluster-randomized sampling: t(96) = 1.419, p = 0.114`

As seen, the proper test is returning a coherent decision with the proper error bars.

Figure 4 is an illustration of the impact of sampling among a finite population.

```
ornateBS <- list(
xlab(""),
ylab("Metabolic score"),
scale_x_discrete(labels=c("Response to treatment")), #new!
coord_cartesian( ylim = c(75,125) ),
geom_hline(yintercept = 100, colour = "black", linewidth = 0.5, linetype=2),
theme_light(base_size = 10) +
theme( plot.subtitle = element_text(size=12))
)
```

Lets do Figure 4 (see below for each plot in a single figure).

```
plt4a <- superbPlot(dataFigure4,
BSFactors = "group",
variables = "score",
adjustments=list(purpose = "single", popSize = Inf),
plotStyle="line" )
plt4a <- plt4a + ornateBS + labs(subtitle="Stand-alone\n95% CI")
```

The option `popSize = Inf`

is the default; it indicates
that the population is presumed of infinite size. A finite size can be
given, as

```
plt4b <- superbPlot(dataFigure4,
BSFactors = "group",
variables = "score",
adjustments=list(purpose = "single", popSize = 50 ), # new!
plotStyle="line" )
plt4b <- plt4b + ornateBS + labs(subtitle="Population size-\nadjusted 95% CI")
```

We illustrate the plot along some distribution information with a violin plot:

```
plt4c <- superbPlot(dataFigure4,
BSFactors = "group",
variables = "score",
adjustments=list(purpose = "single", popSize = 50 ), # new!
plotStyle="pointjitterviolin",
violinParams = list(fill = "green", alpha = 0.2) )
plt4c <- plt4c + ornateBS + labs(subtitle="Population size-\nadjusted 95% CI")
```

Which are reunited as usual:

…and saved with:

```
png(filename = "Figure4.png", width = 640, height = 320)
grid.arrange(plt4a, plt4b, plt4c, ncol=3)
dev.off()
```

The corrected *t* test, performed by adjusting for the
proportion of the population examined (see
Thompson, 2012), confirms the presence of a significant
difference:

```
res <- t.test(dataFigure4$score, mu=100)
tcorrected <- res$statistic /sqrt(1-nrow(dataFigure4) / 50)
pcorrected <- 1-pt(tcorrected, 24)
cat(paste("t-test corrected for finite-population size: t(",
nrow(dataFigure4)-1,") = ", round(tcorrected, 3),
", p = ", round(pcorrected, 3),"\n", sep= ""))
```

`## t-test corrected for finite-population size: t(24) = 2.644, p = 0.007`

Cousineau, D., Goulet, M.-A., & Harding, B. (2021). Summary plots
with adjusted error bars: The superb framework with an implementation in
R. *Advances in Methods and Practices in Psychological
Science*, *4*, 1–18. https://doi.org/10.1177/25152459211035109

Cousineau, D., & Laurencelle, L. (2016). A correction factor for the
impact of cluster randomized sampling and its applications.
*Psychological Methods*, *21*, 121–135. https://doi.org/10.1037/met0000055

Delacre, M., Lakens, D., & Leys, C. (2017). Why psychologists should
by default use welch’s t-test instead of student’s t-test.
*International Review of Social Psychology*, *30*(1). https://doi.org/10.5334/irsp.82

Thompson, S. K. (2012). *Sampling*. New York: Wiley.